Using Intel and AMD processors with Virtualization technology, you customize by choosing CPU, memory and attached storage solutions or internal SATA/SAS drives.
Our enterprise and platinum editions of the NetSecurer Appliance is 24% more dense than Dell & HP Blade servers and 22% more dense that IBM Blade servers. Comparison: Dell and HP - 32 CPU in 10U rack; IBM 28 CPU in 9U Rack; NetSecurer 10 x 1U provides 20 single & dual CPU nodes, offering 20-40 CPUs in 10U and 640-1280 GB memory.
Standard
Default 4 virtual server per node. Standard license increase to unlimited
Enterprise
Default 4 virtual server per node. Enterprise license increase to unlimited with High Availability and Virtual machine automatic placement
Platinum
Default 4 virtual servers. Platinum license increase to unlimited, with Full Virtualization and bare-metal streaming or Virtual Machine
Quad/Dual Core processors
2 nodes single CPU total two (2) CPUs or Max. eight (4) Cores per node 8 total.
Full Redundancy should one node fails, the other takes over.
Supports XenMotion with enterprise license, standard license unlocks XenServer without XenMotion HA capabilities, however failure of one node can be manually restarted on second node.
Supports approx 8/16 Virtual Servers/Desktops with each having one 2-4 gigabyte memory.
Storage is based on 2 x Raid 1 configurations with maximum hard drive capacity of 1 TeraByte SATA. using external Shared storage this can be significantly expanded per VM.
Quad/Dual Core processors
2 nodes dual CPU total four (4) CPUs or Max. eight (8) Cores per node 16 total.
Full Redundancy should one node fails, the other takes over.
Supports XenMotion HA with enterprise license
Supports approx 16/32 Virtual Servers/Desktops with each having one 2-4 gigabyte memory.
Storage is based on 2 x Raid 1 configurations with maximum hard drive capacity of 1 TeraByte SATA. using external Shared storage this can be significantly expanded per VM.
Quad/Dual Core processors
1 node Quad CPUs, total four (4) CPUs or Max. sixteen (16) Cores per node
For full Redundancy should one node fails, for another to take over requires 2 x platinum appliances.
Supports XenMotion HA and baremetal provisoning with platinum license
Supports approx 32/64 Virtual Servers/Desktops with each having one 1-2 gigabyte memory.
Storage is based on Raid 1/10 configurations with maximum hard drive capacity of 1 TeraByte SATA. using external Shared storage this can be significantly expanded per VM.
Motherboard • (2) TYAN S5377 customized 5.9”x13” board provides two physical servers per 1U system
Chipset • Intel® 5100 (San Clemente) North Bridge • Intel® ICH9-R South Bridge • Winbond W83627DHG Super I/O
Memory • Supports eight (8) 240-pin DDR2 DIMM sockets • Maximum of 32GB DDR2-533/667 memory • Supports Registered ECC DIMMs
Expansion Slots • One (1) x16 PCI-E with riser (pre-installed) • One SO-DIMM connector for IPMI 2.0 W/ KVM over IP (Optional)
Video • XGI® Z9S, PCI graphics controller • 32MB DDR2 frame buffer of video memory
Server Management • System fan speed monitoring and control • Optional TYAN M3295-2/M3296 SMDC, IPMI 2.0 compliant
BIOS • AMI BIOS® on 8Mbit Flash ROM • Supports ACPI 2.0 • Supports boot from USB device • WOL and PXE support • Power-on mode control for AC power loss recovery • PnP, DMI2.0, WfM2.0 Power management (S1,S4,S5 support) • Serial Console Redirect
Networking (Per node) • Two LAN ports • Dual Gigabit ports from Intel 82571EB
Enclosure • Industry 19” rack-mountable 1U chassis • Dimension: D 25.4 x W 17.2 x H 1.72 inch (645x436x43.6mm) • Two nodes in one chassis
Power Supply • High efficiency EPS 12V, 1U, 600W with PFC (Note: put on the middle of the chassis) • 100V~240V AC input
Back I/O Ports • One stacked dual USB ports with One RJ45 port (supports M3295-2/M3296 IPMI from LAN) • One stacked up LAN ports with dual RJ45 connectors • One 9-pin COM port • One 15-pin VGA port
Front Panel Features • I/O - (2) USB 2.0 ports - (1) eSATA port(Optional) • LED indicators - Power LED - (2) LAN LEDs - ID LED - HDD active LED - Warning LED • Switches - Power - Reset - NMI - ID
Drive Bay (Per node) • Support (2) 3.5" SATA Hot-swap drive bays
Storage (Per node) • Hard Disk Drives: - Serial ATA II Host controllers embedded - Support (2) SATA/SATA2 HDD with RAID 0,1
System Cooling • (2) 40*40*56mm 15000rpm heavy-duty fans with fan speed monitor/control • (6) 40*40*28mm 15000rpm heavy-duty fans with fan speed monitor/control • (2) Passive CPU heatsinks
Environment Temperature • Operating temperature 5°C ~ 35°C • Non-operating temperature -40°C ~ 70°
Regulatory • FCC Class A (Declaration of Conformity) • CE (Declaration of Conformity) • VCCI • C-Tick • UL
Processor • Two μPGA 1207-pin ZIF sockets Supports up to two AMD® Opteron™ Rev. F 2000/2300 Series • Support AMD dual dynamic power feature • Integrated 128-bit DDR Memory Controller
Chipset • nVIDIA nForce Pro 3600 • SMSC DME5017 • SMSC 6D103 • Mellanox InfiniHost III Lx DDR MT25204A0- FCCD single port (Option)
Memory • Sixteen (16) 240-pin DDRII DIMM sockets. • Supporting up to 64GB of Registered of DDRII- 667/533/400 memory.
Expansion Slots • One (1) x8 PCI-E with riser (pre-installed) • One SO-DIMM connector for IPMI 2.0 W/ KVM over IP (Optional)
Video • XGI Volari Z9s • 16MB frame buffer memory
Drive Bay • Support (2) 3.5" SATA Hot-swap drive bays
Server Management • Automatic fan speed control • Support Tyan Server Management (TSM) • Option TYAN SMDC M3295-2/M3296 KVM-over- IP server management daughter card, IPMI v2.0 compliant remote server management kit.
BIOS • AMI BIOS 8Mbit Flash • Supports ACPI 2.0 • PnP, DMI2.0 WfM2.0 power management
Networking • Two (2) 10/100/1000 Base-T LAN ports ( Intel® “Ophir” (82571EB) Gigabit Ethernet Controller )
Enclosure • Industry 19” rack-mountable 1U chassis • Dimension: D 29.2 x W 17.2 x H 1.72 inch (741.6x436x43.6mm) • (2)Two nodes in one chassis
Power Supply • High efficiency (80+) EPS 12V, 1U, 1000W with PFC for (2) Two nodes • 100V~240V AC input
Back I/O Ports • One (1) 9-pin UART Serial port • One (1) 15-pin VGA port • Two (2) USB2.0 ports • Four (4) RJ-45 10/100/1000 Base-T port w/ activity LED • One (1) RJ-45 connector for OPMA • One (1) InfiniBand connector (Optional)
Front Panel Features • I/O - (2) USB 2.0 ports - LED indicators - Power LED - (1) LAN LED - (1) Infiniband LED - HDD Active LEDs - ID LED - Warning LED • Switches - Power - Reset - ID - NMI
Storage • Serial ATA II Host controllers embedded • Support 2 serial ports running at 3.0 GB/s. NV RAID 0, 1 support
System Cooling • (6) 40*40*56mm 15000rpm heavy-duty fans with fan speed monitor/control. • (2) 40*40*28mm 15000rpm heavy-duty fans with fan speed monitor/control. • (4) Passive CPU Heatsink
Environment Temperature • Operating temperature 5°C~35°C • Non-operating temperature -40°C ~ 70°
Regulatory • FCC Class A (Declaration of Conformity) • CE (Declaration of Conformity)
Motherboard • TYAN S4980 system board • E-ATX footprint, 12” x 13”
Processors • Quad 1207-pin socket • Supports up to 4 x AMD® Opteron™ (95w) Rev. F 8000 series Dual Core/ Quad Core processors • Up to 1.0GHz Hyper-Transport link support
Server Management • M3291, IPMI 2.0 Remote System Management card • Chassis intrusion alert • Renesas H8S2167 BMC controller • BT, KCS, Logging support • IPMI-over-LAN • Remote power on/off and reset
Integrated LAN Controller • (2) MCP55P integrated MAC w/ (2) Marvell 88E1116 single port GbE PHY (TBE) • Integrated TCP offload Engine (TOE) • IEEE802.3 compliant, WOL/PXE support
BIOS • AMI BIOS 8Mbit Flash • Supports ACPI 2.0 • PnP, DMI2.0, WfM2.0 Power management (S1,S4,S5 support)
Enclosure • Industry 19” rack-mountable 1U chassis - (1) slim DVD-ROM bay - (4) 3.5”HDD bays • Dimension: 25.4" x 17.2" x 1.72" (645mm x 436mm x 43.5mm)
Power Supply • EPS 12V 1U, 600W
Front Panel Features • I/O: (2) USB 2.0 ports • LED indicators: HDD Active, power, (2) LAN, ID, sys. warning • Switch: power, reset, NMI, ID
Back I/O Ports • Stacked PS/2 Mouse & Keyboard ports • (1) double-decked USB2.0 ports • (1) COM1 connector • (1) 15-pin VGA port • (2) side-by-side RJ45 10/100/1000 Base-T port with link/activity LED
Storage • Hard Disk Drives: support (4) SATA-II storages w/ RAID 0, 1, 0+1,5, JBOD • (4) CPU passive heatsinks
Integrated Storage Controller • (4) SATA-II ports support running at 3.0Gb/s, by MCP55P
System Cooling • (3) 40*40*56mm & (2) 40*40*28mm system fans • (4) Passive CPU heatsinks
Environment Temperature • Operating temperature 5°C~ 35°C • Non- operating temperature -40°C ~ 70°
Regulatory • FCC Class A and CE (Declaration of Conformity) • VCCI; C-Tick
Hosted Virtual Servers and Desktops in our Datacenter, to reduce cost of ownership and support full redundancy for micro small business... coming soon...
